Introduction
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
How Do They Differ in Forming & Fabricating?
In general, 3003 is fairly soft and has good corrosion resistance, good drawing, good workability, moderate strength, and is weldable.
The best known and most widely used of the common alloys, with about 20% more strength than pure aluminum 1100, 3003 is considered a very practical general-purpose aluminum for moderate strength applications. Normally chosen for its excellent workability and drawing characteristics, it can be welded and brazed by all methods and has excellent corrosion resistance.
Characteristic
Temper: O,T3,T4,T451,T42,T6,T651,T62
Stretching capacity: 300000m2, supposed width is 2000mm, then the maximum thickness is 150mm.
Thickness: 1.0mm--300mm
With: 500mm--3000mm
Length: 1000mm--12000mm
Surface: Mill finish, Bright finish, paper interleaved, one side film, both sides film.
Chemical Composition of 2014 Aluminum Sheet:
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti |
| 3003 | ≤0.6 | ≤0.7 | ≤0.2 | 1.0-1.5 | / | / | / | / | / |
What are your advantages?
1) Fast delivery time
2) High quality, quantity is with preferential treatment
3) We can process to different finish you request
4) 800 Tons/Month, high production capability will short your wait time.
5) Good quality with reasonable price
6) Buyer's Specification Accepted
7) Experienced R & D Department
For More details of each item,contact our sales to know more about it.Thanks for your visiting of JMJDWX Steel,save our web.You will be more professional in steel industry.
